3D Printable Fursuit Headbase: Muridae

If you purchase this file and believe it needs modifications before printing please contact me so I can update the files for you!~ ALL UPDATES AND REVISIONS ARE FREE!

A rodent inspired 3D print file for fursuit heads! Includes a simple hinged jaw and static jaw option.
This is the smallest of me 3D modeled heads so far, you WILL NEED TO SCALE THE FILE UP a few mm to ensure your head can fit inside!
This was modeled around my own head as reference:
About 21 in / 53.5 cm diameter
About 9 in / 23 cm from top of head to chin

This file is intended for large printers but I have included versions that are but into two pieces for you to print as four parts to assemble for smaller print beds.

DEFAULT SCALE for these pieces are as follows (In an upright orientation:)

Wall thickness: about 3mm

static head.stl
222.35 x 226.87 x 284.28 mm
upperteeth.stl
31.1 x 27.7 x 24.5 mm
lowerteeth.stl
31 x 26.6 x 27.3 mm
rodent face.stl
222.4 x 226.9 x 249.8 mm
nose.stl
37.3 x 17.7 x 26.6 mm
lowerjaw.stl
214.35 x 108.85 x 91.3 mm
headback.stl
210.5 x 135.98 x 228.95 mm
eyeblank.stl
72.1 x 50.3 x 94.0
ear.stl
122.6 x 87.9 x 191.6 mm

QUADRANT CUT VERSION MEASUREMENTS For smaller print beds:

hingedTopRight.stl
105 x 137.6 x 125.4 mm
hingedTopLeft.stl
104 x 137.6 x 125.4 mm
hingedBottomRight.stl
111.8 x 145.2 x 105.9 mm
hingedBottomLeft.stl
110.7 x 145.2 x 105.9 mm
hingedNoseTip.stl
91.7 x 80.1 x 97.3 mm
staticBottomLeft.stl
110.6 x 147.0 x 141.7 mm
staticBottomRight.stl
111.6 x 147.0 x 141.7 mm
staticNoseTip.stl
89.2 x 78.5 x 94.1 mm
staticTopLeft.stl
104.6 x 139.8 x 132.5 mm
staticTopRight.stl
105.7 x 139.8 x 132.6 mm

--------------------------------

Any changes made to update this file for easier printing or use will be redistributed to buyers free of charge, simply show proof of ownership and allow for me to contact you or you can contact me on any of my social media!

--------------------------------------

Contact Info:
twt: https://twitter.com/nathahniel
e-mail: nathahnielartist [!at] gmail.com
Etsy: https://www.etsy.com/shop/Nathahniel
Ko-Fi: https://ko-fi.com/nathanier
Gumroad: https://nathahniel.gumroad.com/

-------------------------------
***RULES:***

DO NOT sell or distribute this .stl file
DO NOT upload this file to sites like thingiverse, sketchfab, etc.
You may send these .stl files to an artist to request or commission an edit. The artist is not required to purchase the fileif you are providing it.
You are welcome to use this for crafts other than fursuit heads.

***SELLING BASED ON THESE FILES:***

You CAN sell "remixes" (heavily edited) versions you create of this file. The edits must be substantial (ex: major changes to eye/mouth shape, additions to the mesh).

Can be used for commissions and personal use.
Not intended for large corporate commercial use, this is for freelance artists or personal use only.

You may sell up to a total of 30 prints of any version in these files of this head per year.
You may sell as many premades or commissions made using this head as desired.